Your brand-new DJI Mavic Mini 3 simply gotten here. Are you prepared to require to the skies and check out for the very first time? Or are you wanting to take your drone flying to the next level?
If so, you have actually concerned the ideal location.
In this post, we’ll talk about how to introduce and land your DJI Mini 3 and Mini 3 Pro drones.
Security procedures prior to departure
Introducing your drone is the primary step in any effective flight. Prior to start-up however, it is essential to follow all security procedures. You need to likewise recognize with the location you’re flying in.
Examine the weather condition
To start with, prior to setting out for your journey to your flying area, examine the climate condition.
I recommend seeking advice from UAV Projection ( link). This is a really useful tool I suggest for all drone pilots as it makes the flight preparation procedure a lot simpler.
It covers crucial climate condition that every pilot need to think about prior to removing, such as possibilities of rain, wind speed/direction, variety of GPS satellites readily available, and a lot more.
Examine your controller and drone battery levels
Aside from the weather condition, another next thing to do prior to setting out is to ensure your drone battery and controller are totally charged which you load your drone and the needed devices for the flight you have ahead.
For ideas on how to load your drone bag, take a look at this post here
Look for limited airspace
The last bit preventative measure to take previously setting out is to get familiarized with the airspaces around your flight zone and see whether there are any regulated or limited airspaces.
To make life a lot simpler for drone pilots, we have applications such as Aloft and Airmap.
These applications are openly available maps showing geo zones and airspaces that show locations where drones might and might not fly.
” MORE: Aloft LAANC Permission– How to Use (Detailed Guide)
These apps likewise reveal information on border limitations, constraints, and methods to demand permission to fly and all pertinent contact information that are needed when looking for permission or details.
” MORE: How to Make An Application For LAANC on a Smart Gadget utilizing ALOFT Air Control (Video)
Introducing the DJI Mini 3/Mini 3 Pro
When you have actually examined the weather condition and the location, it’s time to introduce your drone. To introduce your DJI Mini 3 or Mini 3 Pro, you’ll require to very first power on the drone.
Below is a detailed list on the start-up procedure:
- Guarantee the battery is protected on the airplane.
- Turn on the remote controller.
- Link your mobile phone to the controller (RC-N1) utilizing the suitable RC cable television, and open the DJI Fly app.
- Location the airplane on a clear, level surface area (ideally utilizing a landing pad).
- Turn On your DJI Mini 3 or Mini 3 Pro (you might require to adjust or upgrade, describe the lists above).
- Check your controls, change drone and cam settings, and enjoy your flight.
To power on/off your controller, press the power button as soon as, then long press and hold up until the RC makes a power-on signal. The lights will likewise flash, and all 4 will illuminate.
When powering off your controller, you likewise push the power button as soon as, then a long press up until all 4 lights flash and go off.
To power on your drone, change your drone on, push the power button as soon as, then long press and hold up until you hear the drone power up. The props need to likewise flicker.
When it comes to powering off your drone, you likewise push the power button as soon as, then a long press Till all 4 lights flash and go off.
Successive, I recommend adjusting the drone For ideas on adjusting your DJI Mini3 or Mini 3 Pro, examine our post here.
Once the drone is adjusted, you’re prepared to require to the skies and test out your drone.
To Introduce, you can utilize the Vehicle Departure function:
- Introduce DJI Fly and go into the cam view.
- Total all actions in the pre-flight list.
- Tap the Introduce arrow to the left of the screen; If conditions are safe for departure, press and hold the button to verify.
- The airplane will remove and hover roughly 1.2 meters (3.9 feet) in the air.
Once the drone is released, you need to guarantee it’s flying in a straight line. To do this, utilize the left and ideal sticks on the remote controller to change the drone’s instructions.
To land the drone, you can utilize the Vehicle Landing function.
Here’s how:
- Tap the Launch/Land arrow to the left of your screen (the very same one utilized to launch). If conditions are safe for landing, press and hold the button to verify.
- Vehicle landing can be canceled by tapping the very same arrow.
- Landing Defense will be allowed if the Downward Vision System works usually.
- Motors will stop immediately after landing.
Additionally, you can introduce and land your drone by hand. To begin the motors, push both control sticks downwards and inwards and launch them concurrently as soon as the motors begin.
After this, examine your environments for any challenges or passersby (shout clear whenever removing to alert inbound pedestrians), and remove gradually and gradually by pressing the left control stick upwards.
To land, as soon as again examine your environments and ground surface area to ensure the location is clear, and press the left control stick down up until the airplane lands.
Once the drone remains in a safe location, you can power it off. Press and hold the power button for 2 seconds to power off your drone. When the drone is powered off, you can save it away.
Introducing and landing your DJI Mini 3 and Mini 3 Pro drones is a fairly easy procedure.
Nevertheless, it is essential to follow all security procedures and recognize with the location you’re flying in. By following these actions, you can introduce and land your drone securely and effectively.